Name: 800G QSFP-DD SR8 100m
Brand: T&S Communications Co., Ltd.
Availability: InStock

The TSDR8-NAANA1C is an 8-Channel, Pluggable, Fiber-Optic QSFP-DD for 800Gbps SR8 Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 106.25Gbps per lane up to 50m using OM3 fiber and 100m using OM4 fiber. The optical interface uses MPO receptacles.

This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 76 contact edge type connector.

GET A QUOTE About 800G QSFP-DD SR8 100m

800G QSFP-DD SR8 100m Specification Download

Features of 800G QSFP-DD SR8 100m

Hot-pluggable QSFP-DD form factor
Data Rate 106.25 Gb/s PAM4 per lane
8x106Gbps PAM4 transmitter and PAM4 receiver
8 channels 850nm VCSEL laser array and 8 channels PIN photo-detector array
Maximum link length of 50m on OM3 MMF and 100m on OM4 MMF
Digital diagnostics functions are available via the I2C interface
Single 3.3V Power Supply and Power Dissipation < 14W
MPO-16 connector
Operating Case Temperature: 0℃~+70℃
RoHS compliant

Applications of 800G QSFP-DD SR8 100m

800G SR8 Ethernet

Specifications of 800G QSFP-DD SR8 100m

Absolute Maximum Rating

Recommended Operating Environment

Electrical Characteristics

Optical Characteristics

Pin Definition

Ordering Information

These values represent the damage threshold of the module. Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters	Symbol	Min.	Max.	Unit
Power Supply Voltage	VCC	-0.5	+3.6	V
Storage Temperature	Tc	-40	+85	°C
Relative Humidity	RH	0	85	%

Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted.

Parameter	Symbol	Min.	Typical	Max	Unit
Power Supply Voltage	VCC	3.15	3.30	3.45	V
Operating Case Temperature	TCa	0		70	°C

The following electrical characteristics are defined over the Recommended Operating Environment unless otherwise specified.

Parameter	Symbol	Min.	Typical	Max	Unit	Notes
Data Rate per lane	DR	-	106.25	-	Gbps
Transmitter
Single Ended Output Voltage Tolerance		-0.3	-	4.0	V
Common mode voltage tolerance		15	-	-	mV
Input differential impedance	Rin	-	100	-	Ω
Differential Input Voltage swing	Vin	300	-	1100	mV
Tx Fault	VoL	-0.3		0.4	V	At 0.7mA
Receiver
Single Ended Output Voltage Tolerance		-0.3	-	4.0	V
Differential Output Swing	Vout	300	-	900	mV
Output differential impedance	Rout		100		Ω

The following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified.

Parameter	Symbol	Min.	Typical	Max	Unit	Notes
Transmitter
Center Wavelength	λ	844	850	863	nm
RMS spectral width	Pm	-	-	0.6	nm	1
Average Optical Power	Po	-4.6	-	4	dBm	2
Extinction Ratio	ER	2.5	-	-	dBm
Optical Modulation Amplitude(OMAouter) (max)	OMA	3.5			dBm
Optical Modulation Amplitude (OMAouter) (min) max (TECQ, TDECQ) ≤1.8dB 1.8<max(TECQ, TDECQ) ≤4.4dB	OMA	-2.6 -4.4+max(TECQ, TDECQ)			dBm
Transmitter and Dispersion Eye Closure	TDECQ			4.4	dB
Transmitter Eye Closure	TECQ			4.4	dB
Optical Return Loss Tolerance	ORL	-	-	14	dB
Receiver
Center Wavelength	λ	842	850	948	nm
Average Receive power ,each lane		-6.4		4	dBm
Receive power (OMAouter), each lane				3.5	dBm
Receiver Sensitivity（OMAouter） Max (TECQ, TDECQ) ≤1.8dB 1.8<max(TECQ, TDECQ) ≤4.4dB	Psens	-4.6 -6.4+TECQ			dBm	3
LOS Asserted	Lsa	-15	-	-	dBm
LOS De-Asserted	Lda	-	-	-6.6	dBm
LOS Hysteresis	Lh	0.5	-	-	dB

Note:

[1] Trade-offs are available between spectral width, center wavelength and minimum OMA.

[2] The optical power is launched into MMF

[3] BER=2.4E-4; PRBS31Q@53.125GBd.

Pin	Symbol	Name/Description
1	GND	Ground
2	Tx2n	Transmitter Inverted Data Input
3	Tx2p	Transmitter Non-Inverted Data Input
4	GND	Ground
5	Tx4n	Transmitter Inverted Data Input
6	Tx4p	Transmitter Non-Inverted Data Input
7	GND	Ground
8	ModSelL	Module Select
9	ResetL	Module Reset
10	Vcc Rx	+3.3 V Power supply receiver
11	SCL	2-wire serial interface clock
12	SDA	2-wire serial interface data
13	GND	Ground
14	Rx3p	Receiver Non-Inverted Data Output
15	Rx3n	Receiver Inverted Data Output
16	GND	Ground
17	Rx1p	Receiver Non-Inverted Data Output
18	Rx1n	Receiver Inverted Data Output
19	GND	Ground
20	GND	Ground
21	Rx2n	Receiver Inverted Data Output
22	Rx2p	Receiver Non-Inverted Data Output
23	GND	Ground
24	Rx4n	Receiver Inverted Data Output
25	Rx4p	Receiver Non-Inverted Data Output
26	GND	Ground
27	ModPrsL	Module Present
28	IntL	Interrupt
29	VCC Tx	+3.3 V Power supply transmitter
30	VCC1	+3.3 V Power Supply
31	InitMode	Initialization mode; In legacy QSFP applications, the InitMode pad is called LPMODE
32	GND	Ground
33	Tx3p	Transmitter Non-Inverted Data Input
34	Tx3n	Transmitter Inverted Data Input
35	GND	Ground
36	Tx1p	Transmitter Non-Inverted Data Input
37	Tx1n	Transmitter Inverted Data Input
38	GND	Ground
39	GND	Ground
40	Tx6n	Transmitter Inverted Data Input
41	Tx6p	Transmitter Non-Inverted Data Input
42	GND	Ground
43	Tx8n	Transmitter Inverted Data Input
44	Tx8p	Transmitter Non-Inverted Data Input
45	GND	Ground
46	Reserved	For future use
47	VS1	Module Vender Specific 1
48	Vcc Rx1	+3.3 V Power supply receiver
49	VS2	Module Vender Specific 2
50	VS3	Module Vender Specific 3
51	GND	Ground
52	Rx7p	Receiver Non-Inverted Data Output
53	Rx7n	Receiver Inverted Data Output
54	GND	Ground
55	Rx5p	Receiver Non-Inverted Data Output
56	Rx5n	Receiver Inverted Data Output
57	GND	Ground
58	GND	Ground
59	Rx6n	Receiver Inverted Data Output
60	Rx6p	Receiver Non-Inverted Data Output
61	GND	Ground
62	Rx8n	Receiver Inverted Data Output
63	Rx8p	Receiver Non-Inverted Data Output
64	GND	Ground
65	NC	No Connect
66	Reserved	For future use
67	VCC Tx1	+3.3 V Power supply transmitter
68	VCC2	+3.3 V Power Supply
69	Reserved	For future use
70	GND	Ground
71	Tx7p	Transmitter Non-Inverted Data Input
72	Tx7n	Transmitter Inverted Data Input
73	GND	Ground
74	Tx5p	Transmitter Non-Inverted Data Input
75	Tx5n	Transmitter Inverted Data Input
76	GND	Ground

Part Number	Product Description
TSDR8-NAANA1C	800G QSFP-DD SR8 Optical Transceiver 50m on OM3 MMF and 100m on OM4 MMF 0ºC ~ +70ºC