Name: 200G QSFP56 Breakout AOC
Brand: T&S Communications Co., Ltd.
Availability: InStock

The TSQSS-852HG-XXXC is a Four-Channels, Pluggable, Parallel, Fiber-Optic QSFP56 for 200 Gigabit Ethernet Applications, Infiniband HDR Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 200Gbps bandwidth.

This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector.

GET A QUOTE About 200G QSFP56 Breakout AOC

200G QSFP56 Breakout AOC Specification Download

Features of 200G QSFP56 Breakout AOC

Supports IBTA InfiniBand HDR
200Gb/s HDR to 2x100Gb/s HDR data rate
4x 50Gb/s PAM4 modulation
SFF-8665 compliant QSFP56 port
SFF-8636 compliant I2C management
Single 3.3V power supply
4.5W power dissipation each end, with retiming
Operating case tempcommercial:0°C to 70°C
RoHS6 compliant (lead free)

Applications of 200G QSFP56 Breakout AOC

200Gb/s InfiniBand HDR systems
Other optical links

Specifications of 200G QSFP56 Breakout AOC

Absolute Maximum Ratings

Recommended Operating Environment

Transmitter Specifications

Receiver Specifications

Parameter	Symbol	Min	Typical	Max	Unit
Storage Temperature	TS	-20	-	85	°C
Relative Humidity	RH	0	-	85	%
Case Operating Temperature	TCase	0	-	70	°C
Supply Voltage	VCC	-0.5	-	3.6	V

Parameter	Symbol	Min	Typical	Max	Unit
Power Supply Voltage	VCC	3.135	3.300	3.465	V
Operating Case Temperature	TC	0	25	70	°C
Power dissipation (200G retiming on all lanes)	Pd200G	-	-	4.5	W
Power dissipation (100G retiming on all lanes)	Pd100G	-	-	2.5	W

Parameter	Symbol	Min	Typical	Max	Unit
Signaling Speed per Lane	-	PRBS31Q@26.5625Gbd PAM4			Gb/s
Center Wavelength	λc	840	850	860	nm
Differential Input Impedance	Zin	90	100	110	Ohm
Differential Input Voltage	Vin	-	900	-	mVp-p
Differential termination mismatch	-	-	-	10	%
DC common mode voltage	-	-350	-	2850	mV

Parameter	Symbol	Min	Typical	Max	Unit
Signaling Speed per Lane	-	PRBS31Q@26.5625Gbd PAM4			Gb/s
Center Wavelength	λc	840	850	860	nm
Differential termination mismatch	-	-	-	10	%
Differential Output Impedance	Zout	90	100	110	Ohm
Differential Output Voltage	Vout	-	-	900	mVp-p
DC common mode voltage	-	-350	-	2850	mV
Error Bit Rate	BER	-	-	2.4E-4	PRBS31Q@26.5625Gbd PAM4

Electrical Pad Layout of 200G QSFP56 Breakout AOC

Pin definition of 200G QSFP56 Breakout AOC

Pin	Symbol	Name/Description
1	GND	Ground
2	Tx2n	Transmitter Inverted Data Input
3	Tx2p	Transmitter Non-Inverted Data Input
4	GND	Ground
5	Tx4n	Transmitter Inverted Data Input
6	Tx4p	Transmitter Non-Inverted Data Input
7	GND	Ground
8	ModSelL	Module Select
9	ResetL	Module Reset
10	Vcc Rx	+3.3 V Power supply receiver
11	SCL	2-wire serial interface clock
12	SDA	2-wire serial interface data
13	GND	Ground
14	Rx3p	Receiver Non-Inverted Data Output
15	Rx3n	Receiver Inverted Data Output
16	GND	Ground
17	Rx1p	Receiver Non-Inverted Data Output
18	Rx1n	Receiver Inverted Data Output
19	GND	Ground
20	GND	Ground
21	Rx2n	Receiver Inverted Data Output
22	Rx2p	Receiver Non-Inverted Data Output
23	GND	Ground
24	Rx4n	Receiver Inverted Data Output
25	Rx4p	Receiver Non-Inverted Data Output
26	GND	Ground
27	ModPrsL	Module Present
28	IntL	Interrupt
29	VCC Tx	+3.3 V Power supply transmitter
30	VCC1	+3.3 V Power Supply
31	LPMode	Low Power Mode
32	GND	Ground
33	Tx3p	Transmitter Non-Inverted Data Input
34	Tx3n	Transmitter Inverted Data Input
35	GND	Ground
36	Tx1p	Transmitter Non-Inverted Data Input
37	Tx1n	Transmitter Inverted Data Input
38	GND	Ground

Drawing of 200G QSFP56 Breakout AOC

Unit mm

	L	L1	L2	L3	W	W1	W2	H	H1	H2
Max	72.2	-	128	4.35	18.45	-	6.2	8.6	12.0	5.35
Type	72.0	-	-	4.20	18.35	-	-	8.5	11.8	5.2
Min	68.8	16.5	124	4.05	18.25	2.2	5.8	8.4	11.6	5.05

Ordering information of 200G QSFP56 Breakout AOC

Part Number	Product Description
TSQS-852HG-xxxC	QSFP56 200G to 2x100G AOC 0°C ~ +70°C
xxx = denotes the AOC length with unit meter. For example,001 denote 1m, 002 denote 2m … 099 denote 99m.

Important Notice of 200G QSFP56 Breakout AOC

Performance figures, data and any illustrative material provided in this data sheet are typical and must be

specifically confirmed in writing by T&S before they become applicable to any particular order or contract. In accordance with the T&S policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of T&S or others. Further details are available from any T&S sales representative.